×

# Noise in communication system

The term noise refers to unwanted electrical signals that are present in electrical system.it limits the receiver's ability to make correct symbol decisions and thereby limits the rate of information transmission. Good engineer can eliminate much of the noise or its undesirable effect through filtering,shielding,the choice of modulation,and the selection of an optimum receiver site. However,there is one natural source of noise, called thermal or Johnson noise,that can not be eliminated.Thermal noise caused by the thermal motion of electrons in all dissipative components-resistors,wires,and so on.

Note by Iqra Yasin
3 years, 9 months ago

MarkdownAppears as
*italics* or _italics_ italics
**bold** or __bold__ bold
- bulleted- list
• bulleted
• list
1. numbered2. list
1. numbered
2. list
Note: you must add a full line of space before and after lists for them to show up correctly
paragraph 1paragraph 2

paragraph 1

paragraph 2

[example link](https://brilliant.org)example link
> This is a quote
This is a quote
    # I indented these lines
# 4 spaces, and now they show
# up as a code block.

print "hello world"
# I indented these lines
# 4 spaces, and now they show
# up as a code block.

print "hello world"
MathAppears as
Remember to wrap math in $$...$$ or $...$ to ensure proper formatting.
2 \times 3 $$2 \times 3$$
2^{34} $$2^{34}$$
a_{i-1} $$a_{i-1}$$
\frac{2}{3} $$\frac{2}{3}$$
\sqrt{2} $$\sqrt{2}$$
\sum_{i=1}^3 $$\sum_{i=1}^3$$
\sin \theta $$\sin \theta$$
\boxed{123} $$\boxed{123}$$