Algorithms
An algorithm is a procedure that takes in input, follows a certain set of steps, and then produces an output. Oftentimes, the algorithm defines a desired relationship between the input and output. For example, if the problem that we are trying to solve is sorting a hand of cards, the problem might be defined as follows:
Problem: Sort the input.
Input: A set of 5 cards.
Output: The set of 5 input cards, sorted.
Procedure: Up to the designer of the algorithm!
This last part is very important, it's the meat and substance of the algorithm. And, as an algorithm designer, you can do whatever you want to produce the desired output! Think about some ways you could sort 5 cards in your hand, and then click below to see some more ideas.
$\hspace{0mm}$ We could simply toss them up in the air and pick them up again. Maybe they'll be sorted. If not, we can try it again and again until it works (spoiler: this is a bad algorithm).
$\hspace{0mm}$ We can sort them one at a time, left to right. Let's say our hand looks like {2, 4, 1, 9, 8}. Well, 2 and 4 are already sorted. But then we have a 1. That should go before 4, and it should go before 2. Now we have {1, 2, 4, 9, 8}. 9 is in the right spot because its higher than the card to its left, 4. But 8 is wrong because it's smaller than 9, so we'll just put it before 9. Now, we have {1, 2, 4, 8, 9}, and we're done. This is called insertion sort.
$\hspace{0mm}$ We can sort them two at a time, left to right. So, our hand is again {2, 4, 1, 9, 8}. 2 and 4 are good. 4 and 1 need to be swapped, so now we have {2, 1, 4, 9, 8}. 4 and 9 are good. 9 and 8 should be swapped, so now we have {2, 1, 4, 8, 9}. We have to start at the beginning again, but that's no problem. We look at the first pair and see that 2 and 1 need to switch, so now we have {1, 2, 4, 8, 9}, and we're done. This is called bubble sort.
$\hspace{0mm}$ There are a million ways to sort this hand of cards! Some are great, most are terrible. It's up to you as the algorithm designer to make a great one.
The study of algorithms involves finding the best ways to achieve the desired output given an input and a goal. Learning about algorithms is essential to being a successful computer programmer, and understanding them can help give you an idea of how computers work. So, if you'd like to learn to code, it's absolutely essential to learn about algorithms.
Contents
Algorithms and Computers
Even though algorithms existed before the modern computer, they lie at the heart of computing and technology. Everything you've ever done on any piece of technology relies on algorithms because they tell technology what to do. Algorithms are responsible for your ability to surf the web at tolerable speeds. Imagine that you're visiting a website, and that website has a lot of unsorted content to show you. If it randomly picked a content order every time you visited it, and threw that order away and tried again if it wasn't correct, you'd be waiting for minutes, hours, or even days before your web page loaded!
Studying computer science and computer programming always involves algorithms because the study of algorithms teaches you to think like a machine so that you can program them in the best way possible. If you'd like to learn how to write applications, make websites, or do data analysis, you need to know about algorithms so that your code will run fast and run correctly.
On the theoretical side, many of the simpler algorithms have long since been discovered and heavily studied, but there are many areas left to research. For example, in theoretical computer science, a lingering question is whether P = NP, or in other words, "Are problems that can be quickly verified by a computer able to be quickly solved by a computer?" Currently, we don't think so. But if it turned out to be true, then computing and technology would experience an enormous speed increase that we would all benefit from. However, this would also mean that modern cryptography is not safe and any hacker could easily crack codes to any system in the world!
As computing grew, applications of computing grew along with it. In order to perform the algorithms that would enable those applications, computer scientists needed a way to represent and store that data. If we wanted to input a set of cards into a computer program, how would we store that data? How would we feed it into the algorithm? Early on, it was good enough to simply represent data as computer bits (zeroes and ones). However, that method could never last, it was too difficult and timeconsuming.
Data structures were the answer. Their invention and research is paralleled by, and is often taught alongside, algorithms. The card sorting algorithm, for example, could take in an array of numbers to represent cards. More data structures were invented over time, and they allowed algorithm design to progress with them. With these in place, it became much easier to reason about, develop, and research algorithms.
Properties of Algorithms
Algorithms have 3 main properties that are important to remember during their design and analysis.
Algorithm Properties:
 Time complexity. This is the time an algorithm takes to complete, and it is often given using big O notation with its input as the independent variable. For example, if we want to search a card in the sorted $n$ cards, we can do in logarithmic time, and the time complexity would be $O\big(\log(n)\big)$.
 Space complexity. This is the space (in computer memory) the algorithm uses during its execution. Again, if we're sorting $n$ cards, and we need to make an extra array of size $n$ for each card to do so, the space complexity would be $O\big(\log(n^2)\big)$.
 Correctness. An algorithm is correct if and only if, for every input, it halts and outputs the correct output. Contrary to what you might think, algorithms that are not correct are sometimes useful. For example, partially correct algorithms only guarantee that if the algorithm halts, the answer will be correct.
An algorithm can be expressed in a variety of ways, many of which you'll find in different wikis here on Brilliant.
A few examples of how an algorithm can be described are as follows:
 A highlevel description. This might be in the form of text or prose that describes the algorithm: it's input, output, and goal. Generally, this does not involve implementation details of the algorithm.
 Formal definition. A formal definition will often give the input and output of the algorithm in formal mathematical terms. The procedure by which the output is achieved is also formally notated. This is a more mathematical way of representing an algorithm.
 Pseudocode. This is a way of loosely formalizing an algorithm, and it is often used when learning algorithms. There are general implementation details; however, languagespecific details are left out so as not to complicate things.
 Implementation. An implementation in a given language will be a piece of code that is understandable and runnable by a computer. It will fulfill the goals and procedure of the algorithm; however, it is harder to include highlevel detail in an implementation because a computer will reject plain text.
Types of Algorithms
There are many types of algorithms, and the language that describes them varies from textbook to textbook and from person to person. Some algorithm labels describe their function, and others describe the process by which they perform their function.
For example, there is a type of algorithm called string matching algorithms; these algorithms find occurrences of an input string in larger strings or pieces of text. An example of a string matching algorithm is the RabinKarp algorithm, but there are many more. On the other hand, an example of a label that describes an algorithm's method for solving the problem is the divide and conquer algorithm. An example of this is binary search, which searches for a target in sorted input by cutting up the input into smaller pieces until the target is found.
A specific algorithm can span both classes. For example, a sorting algorithm that performs its sorting recursively could be described as either a sorting function or a recursive function.
Labels that describe function:
Algorithm Label  Description 
Sorting algorithms  Sort a list of comparable inputs. 
Graph algorithms  Perform elementary graph algorithms such as search. 
Shortest path algorithms  Find the shortest path(s) between points in a graph. 
String matching algorithms  Search larger pieces of text for input strings. 
Maxflow algorithms  Calculate the maximum flow in a flow network. 
Computational geometry algorithms$\hspace{2cm}$  A branch of algorithms that can be stated in terms of geometry 
Numbertheoretic algorithms  Algorithms that deal with number theory such as GCD 
Fast fourier transform algorithms  Efficient algorithms that perform fourier transform 
Matrix algorithms  Algorithms that perform operations on matrices 
Labels that describe process:
Algorithm Label  Description 
Divide and conquer algorithms  Divide problem into smaller subproblems that can be recombined for an answer. 
Greedy algorithms  Simple, naive approaches to problems that typically return suboptimal answers 
Dynamic programming algorithms  Create smaller subproblems whose answers help solve larger and larger subproblems. 
Recursive algorithms  Algorithms that continuously call upon themselves to solve smaller and smaller problems until a basis is formed for the final solution 
Brute force algorithms  An approach to solving problems that attemps to solve the problem with more computing power, rather than elegance 
Backtracking algorithms  Algorithms that build collections of partial candidates for solutions, forgetting them only when they become impossible 
Probabilistic and randomized algorithms  Algorithms that use any form of randomization (also called nondeterministic algorithms) 
Approximation algorithms  Methods that attempt to cut down on computation time by making approximations, getting within some factor of the optimal answer 
Multithreaded algorithms  Algorithms that run on multiple threads to parallelize work 
Linear programming algorithms  Solutions that achieve optimal answers by using linear relationships of the inputs 
Designing an Algorithm
When designing an algorithm, it is important to remember that computers are not infinitely fast and that computer memory is not infinitely large. That's why we make algorithms, after all. So, maybe you're designing an algorithm for a computer that is super fast but doesn't have much memory. Maybe you'll make some concessions on the computational requirements so that you can save memory.
But even if you never had to worry about speed or space, you still need to design a good algorithm. Why? You need to design a good algorithm because you need to know that the algorithm will do what you want it to do and that it will stop once it's done. You need to know that it will be correct.
Efficacy
The efficacy of the algorithm you're designing comes down to time complexity and space complexity. In an ideal world, the algorithm is efficient in both ways, but there is sometimes a tradeoff between them. It is up to the designer to weigh their needs appropriately in order to strike a balance.
It is also up to the designer to make a good algorithm. Doing so requires an understanding of algorithms as well as an understanding of existing algorithms to guide your design process. Otherwise, they might find themselves with a bad algorithm.
Two algorithms that do the same exact thing in different ways could have enormous differences in efficacy. In sorting, for example, bubble sort requires $O(n)$ space during its execution. Quick sort, on the other hand, requires $O\big(n\lg(n)\big)$ space. What does that mean for the programmer using those algorithms? Let's assume for simplicity that the input is just 1KB of data (or 8000 bits). Quicksort will require $\lg(8000)$ times more space, or almost 13 times more space than bubble sort. Scale that up to inputs of 1GB or even 1TB, and this difference becomes very noticeable and very inefficient.
However, it's worth noting that quicksort runs faster than bubble sort by the same factor. Again, it's a tradeoff, and it's up to the designer to understand the tradeoffs and to optimize their design for their needs.
Analyzing and Evaluating an Algorithm
The analysis and evaluation of an algorithm is a twostep process. In the analysis portion, the algorithm is studied to learn about its properties: time/space complexity and correctness. Any method of describing the algorithm, as enumerated above, can be studied. However, that description must contain enough information about the inner workings of the algorithm to provide a clear picture of its procedure.
In general, there are a few ways to describe time complexity. There's the bestcase, the averagecase, and the worstcase for the algorithm. As a programmer, it's important to know each case so that you fully understand how your algorithm will operate. Which case you focus on is up to you, but the worstcase performance is often used as a benchmark for algorithms.
The evaluation portion is more qualitative and requires the observer to make decisions about the efficacy of the algorithm on its own, and as it relates to other similar algorithms. You might see the algorithm and notice that it is making some critical errors that increase its runtime. You might also discover that its runtime is drastically different than other algorithms that accomplish the same thing. In either case, the evaluation result is poor.
Let's take a look at the pseudocode for an algorithm and try to analyze its time complexity. The following pseudocode is that of insertion sort, a basic sorting algorithm. It takes as its input an array, $A$, of the number and returns that same array, sorted. Note that this pseudocode assumes 1indexing (the first index in the array is 1, not 0).
1 2 3 4 5 6 7 8Insertion_Sort(A) for j = 2 to j = A.length: current = A[j] i = j  1 while i > 0 and A[i] > current: A[i+1] = A[i] i = i  1 A[i + 1] = current
First, let's look at what this code is doing. We are given an input array of numbers, let's say
[4, 2, 3, 7, 8]
. The algorithm iterates through that array, starting with the second element, in this case,2
. It calls this numbercurrent
. It grabs the index right beforecurrent
, which is1
and whose value is4
, and sets it equal toi
. Now it wants to move4
to the correct location. The while loop says "while the indexi
is more than 0, and while the number2
is greater than its neighbor to the left, move2
to the left and decreasei
by 1". So,2
is moved until it's in the correct spot with respect to the numbers seen so far by the algorithm.This pseudocode can be analyzed by looking through this code line by line. In line 2, it has a for loop that iterates from the value 2 to the value A.length which is our input size, $n.$ So, already we know for a fact that this algorithm is at least dependent linearly on our input size. In other words, the runtime of this algorithm is at least $O(n)$ or $\Omega(n)$.
Everything inside the for loop must be executed $n$ times, so we can ignore constant time operations such as lines 3, 4, and 8. Instead, line 5 is where the focus must shift because it is another iterable loop.
The while loop on line 5 is similar to the for loop on line 2, but it has a variable number of times it can be repeated. That number can vary from 1 to $n$ depending on how sorted our array is initially. If the input array is
[2, 3, 4, 7, 8]
, for example, thewhile
loop will only run 1 time because each element is not greater than the element to its left. However, if the input is[8, 7, 4, 3, 2]
, the while loop will need to run $O(n)$ times. To see why, let's see what the array looks like after each iteration of the while loop:
1 2 3 4 50 (input). [8, 7, 4, 3, 2] 1: [7, 8, 4, 3, 2] 2: [4, 7, 8, 3, 2] 3: [3, 4, 7, 8, 2] 4: [2, 3, 4, 7, 8]
See how between the $3^\text{rd}$ and $4^\text{th}$ iteration the
2
had to move all the way across the array? That's $O(n)$ times.So, the for loop on line 2 iterates $O(n)$ times. And the while loop on line 5 iterates anywhere from $O(1)$ to $O(n)$ times. So, the bestcase runtime is $O(n)$ when the input list is already sorted, and the worstcase is $O(n^2)$ when it is sorted in reverse order. The averagecase is a little trickier to understand. Basically, we'd expect any element in the input array to be less than half the elements to its left. Half of the elements is still $\frac{n}{2},$ which is still $O(n)$, so the averagecase is also $O(n^2)$.
The following pseudocode represents an algorithm that takes as input an array of elements that can contain either positive integers or strings. In other words, the input could look like this [42, 'a', 1, 'hello', 3]
.
The algorithm outputs an array with the following properties: elements in the output alternate between being a string and being an integer, and each element is less than or equal to the previous element of the same type (except for the elements at position 1 and 2, which are the largest of their respective types). In computer science, it is possible to sort strings ('b' > 'a', for example). This output will contain more elements than the input if the input does not have the same number of integers and strings.
What is the runtime of this algorithm?
For this example, assume that the sorting algorithm Reverse_Cheating_Sort(A) is a constant $O(1)$ operation.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 

Hard Algorithms
Typical algorithms are generally efficient. They run in polynomial time. In other words, their runtime can be defined as $O(n^x)$ for some input $n$ and some integer $x$. However, there is a class of algorithms that do not currently have a polynomialtime solution. Some famous examples of this are the traveling salesperson problem or the set cover problem.
These problems are called NPcomplete problems and are very interesting to study. Although no polynomialtime algorithm has ever been discovered for them, no one has proven that there can't be one out there, waiting to be discovered. Furthermore, if a solution was found for just one of them, a solution could be inferred for all of them!
There are currently various algorithms that make good approximations for solutions to these problems. They might use heuristics to cut down on runtime. However, the answer is not always exact, and the algorithm is therefore not correct.
The field of computer science contains many exciting areas to explore. In theory and algorithms, the question of NPcompleteness and its relationship to other algorithms is one that has puzzled computer scientists for decades and that has many important implications for technology and for the world.